Free Shipping within Guangdong & Standard VAT Invoice Included
Free delivery available for orders within Guangdong Province. A standard VAT invoice will be provided together with goods at no extra charge. Freight for destinations outside Guangdong shall be quoted separately.
FS3201PA‑F
Parts deliver outstanding mechanical performance, superior dimensional accuracy and fine‑detail resolution. Well‑suited for serial production of high‑performance thin‑wall components for automotive, aerospace, electrical and consumer‑goods industries.
Black
1.01 g/cm³
FS4200PA‑F
Excellent toughness and impact resistance with 40 % elongation at break and unnotched impact strength of 32 kJ/m². A cost‑effective high‑toughness grade for orthopedic medical parts, automotive interiors and consumer‑goods components.
Black
1.01 g/cm³
FS3401GB‑F
Flight‑series glass‑bead reinforced material with enhanced stiffness and flexural modulus up to 2200 MPa. Ideal for structural support parts and housings such as power‑tool enclosures.
Black
1.26 g/cm³
FS6140GF‑F
Excellent rigidity and creep‑resistance with superior mechanical and thermal properties. HDT reaches 200 °C, tensile modulus 6000 MPa. Especially suitable for end‑use components working under high‑temperature conditions in automotive and electronics industries.
Black
1.41g/cm³
FS6130CF‑F
Outstanding strength and modulus; tensile strength 110 MPa, flexural modulus 6000 MPa. Enables plastic‑for‑metal substitution as an alternative to conventional aluminum alloys for complex structural brackets and load‑bearing parts.
Black
1.07g/cm³
316L Stainless Steel
Manufactured via SLM laser powder‑bed fusion. High strength with excellent corrosion resistance. Used for complex metal components in medical devices, chemical equipment and marine engineering.
Silver
7.99g/cm³
AlSi10Mg Aluminum Alloy
Produced by SLM laser melting. Preferred material for lightweight design, featuring high strength‑to‑weight ratio and good thermal conductivity. Suitable for complex aluminum‑alloy parts in aerospace, automotive lightweighting and radiator components.
Silver
2.67g/cm³
18Ni300 Maraging Steel
Fabricated by SLM laser melting. High hardness and excellent wear resistance. Applied for injection‑mold and die‑cast mold components. Conformal cooling channels greatly improve mold service life and production efficiency.
Silver
8.00g/cm³