FARSOON SLS / SLM GUIDE
Farsoon SLS/SLM Material Quick Reference Guide
Covers 5 SLS nylon powder materials and 3 SLM metal materials. Tensile strength, HDT, impact properties, and physical parameters at a glance. MDS data sourced from Farsoon 2024 Technical Parameter Table.
including general invoice (VAT ordinary invoice)
goods at no extra cost. Out-of-province shipping to be discussed.

FS3201PA‑F (PA12-like)
A PA12-like polymer material suitable for high-performance functional part manufacturing. Tensile strength 42MPa, elongation at break 20%. Excellent mechanical properties, ultra-high processing accuracy and detail resolution, ideal for high-performance, thin-walled series production. Suitable for automotive, aerospace, electrical appliances, consumer goods and other industries.

FS4200PA‑F (PA11-like)
PA11-like material with excellent impact resistance. Elongation at break 40%, unnotched impact strength 32KJ/m². Outstanding toughness and impact resistance, low water absorption, heat resistant. A highly cost-effective high-toughness material, suitable for medical orthopedics, automotive interiors, and functional parts for consumer goods.

FS3401GB‑F (PA12+Glass Beads)
A Flight glass bead reinforced material with superior rigidity. Tensile modulus 2500MPa, HDT@0.45MPa up to 150℃. Excellent mechanical strength and rigidity, ideal for structural support parts or housings such as power tool shells. Suitable for functional end-part production.

FS6140GF‑F (PA6+Glass Fiber)
Glass fiber reinforced PA6 material. Tensile strength 70MPa, flexural modulus 4800MPa, HDT@1.8MPa up to 150℃. Excellent rigidity, corrosion and wear resistance, with outstanding mechanical and thermal properties. Especially suitable for final-use parts in high-temperature environments such as automotive and electronics.

FS6130CF‑F (PA6+Carbon Fiber)
Carbon fiber reinforced PA6. Tensile strength 110MPa, modulus 10GPa, HDT@1.8MPa up to 210℃. Excellent strength and modulus, enabling plastic to replace steel and substitute conventional aluminum alloys for complex structural brackets and load-bearing parts. Suitable for automotive, electronics, machinery and other high-temperature end-use parts.

316L Stainless Steel
Austenitic stainless steel powder. Tensile strength ≥550MPa, yield strength ≥300MPa, elongation ≥30%. Excellent corrosion and high-temperature resistance, good formability. Suitable for medical devices, chemical equipment, marine engineering, food processing and other corrosion-resistant parts and small-batch high-end components.

AlSi10Mg Aluminum Alloy
Al-Si-Mg alloy powder. Tensile strength ≥350MPa, yield strength ≥220MPa, density 2.67g/cm³. Lightweight and high-strength with excellent thermal conductivity and processability. Suitable for automotive lightweight structural parts, aerospace brackets, heat sink housings, motor housings, etc.

18Ni300 Maraging Steel
Maraging steel powder. After aging, tensile strength ≥1500MPa, hardness ≥45HRC, elongation ≥8%. Ultra-high strength, high toughness, good polishability and weldability. Suitable for injection molds, die-casting molds, high-precision fixtures and high-performance structural parts.
Title
Version Info
Consult a Technical Expert
Bring your drawings and requirements, and we will help determine the most suitable equipment, material, and printing solution.
Request a Quote