What File Format Does 3D Printing Need? STL vs STEP vs IGS
For a 3D printing job, the first step is sending the right file. The same 3D model exported in different formats gives your supplier different options — which processes can be run, and how much of the design they can actually see. Below we go through the three formats we receive most often (STL, STEP and IGS), what to check before you submit a file, and how the requirements change from one process to another.
1. What each format actually is
STL is the oldest of the three and the most widely used exchange format for 3D printing. It describes a part as a mesh of flat triangles, so it carries shape only — no colour, no material and no feature information. Almost every printing machine reads STL directly, which makes it the simplest choice when the part is going straight to printing.
STEP is a solid modelling format that keeps complete geometric surfaces and the feature tree. CAM software can read it, so it is the better choice for CNC machining, for checking assembly fit, or for any project where the design may still change.
IGS is a surface format, common in older drawings from the automotive and mould-making industries. It is broadly compatible, but exported surfaces are sometimes broken and need repair after import, so when a job comes in as IGS we usually ask for a STEP copy as well.
To put it simply: for printing, STL is the most direct; for machining or design changes, STEP is the safest; and for legacy automotive or mould files, IGS is accepted but a STEP copy makes it more reliable.
2. What each format lets the supplier do
On the surface all three are just “a model file”, but they open up different options on our side.
- STL only — printing is straightforward. If the same part later needs CNC machining, it usually has to be converted back into a solid, and complex surfaces can lose accuracy in the process.
- STEP — supports both printing and CNC, and lets us check assembly clearances. The right choice for a part with more than one use, or a design that may still be revised.
- IGS — printing and machining are both possible, but time has to be set aside for surface repair, so the lead time runs slightly longer.
So if the part will be machined later, or the structure may still change, sending STEP from the start saves a step down the line.
3. How Primofort handles incoming files
Primofort accepts STL, STEP and IGS. Every file gets a printability review before anything is quoted or cut: whether walls are too thin, whether overhangs need support, whether deep cavities can be cleared of powder, and whether threads and tolerances are clearly marked. If something will not work, we raise it before production starts rather than after. If all you have is a 2D drawing or a physical sample, talk to us first — we can look at modelling the part from what you have.
4. Four things to check before you submit
- Units — confirm the export unit is millimetres. A wrong unit scales the whole part up or down, and it is the most common and most easily missed mistake.
- Watertightness — export the STL as a closed solid. Broken faces and non-manifold edges trigger slicing errors or produce a wrong cross-section.
- Minimum features — thin walls, narrow pins and sharp corners need enough material thickness. Structures that are too thin tend to break or distort during printing and finishing.
- Assembly — for multi-part assemblies, leave and mark the mating clearance in the file, so you do not find out after printing that the parts will not fit.
5. Which format fits which purpose

- Shape and assembly review only — STL is enough.
- The part is going to CNC, or the design may still change — STEP saves time.
- The file comes from an automotive or mould-making archive — IGS is accepted, and a STEP copy makes it safer.
- You only have a 2D drawing or a physical part — get in touch first, and we can confirm whether modelling is feasible.
6. Requirements differ by process
The same STL behaves differently in different processes.
- SLS / MJF powder-bed nylon — reads STL. Walls are generally no thinner than 1mm, and closed internal cavities need a powder escape opening, otherwise trapped powder cannot be cleared out.
- SLA resin — reads STL. Thin walls and slender features need a support assessment; resin shrinks, so critical dimensions need compensation.
- SLM metal — reads STL. Supports are designed separately and thermal stress has to be considered; complex parts also need machining allowance.
- FDM — reads STL. Layer lines are more visible, so tell us in advance which faces need a better surface finish.
- CNC machining — STEP is the better input, because mating surfaces can be toolpathed directly from the solid.
7. Common export problems
- Mesh too coarse — if the STL export tolerance is set too loose, cylindrical surfaces turn into visible facets. Tighten chord height and angle tolerance before exporting.
- Wrong orientation or a model away from the origin — this affects nesting and build direction, so square up the coordinate system first.
- Hidden parts or construction lines left in — clean out anything that is not the part being made.
- Oversized files — very dense meshes make files slow to transfer and process; export to the accuracy the job actually needs.
Conclusion
Send the drawing (STL, STEP or IGS are all fine) together with what the part is for, and Primofort will run a printability review first, then come back with a recommended process route and lead time — no payment is needed to get that assessment. When you export, keep the unit in millimetres and the model watertight; and if all you have is a 2D drawing or a physical sample, we can start from there.
